Wholesale China dissolved oxygen probe Manufacturers Pricelist - BH-485-DO Digital Dissolved Oxygen Sensor – BOQU Detail:
BH-485 series online dissolved oxygen electrode,adopt original battery type oxygen sensing electrode, and internal electrode to achieve the automatic temperature compensation and digital signal conversion. With rapid response, low maintenance cost, real-time online measurement. The electrode adopt the standard Modbus RTU (485) protocol, 24V DC power supply, four wire mode, can be very convenient to access to sensor networks.
·The on-line oxygen sensing electrode, can work stably for a long time.
·Built in temperature sensor, real-time temperature compensation.
·RS485 signal output, strong anti-interference ability, output distance up to 500m.
·Using the standard Modbus RTU (485) communication protocol
·The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode
·24V – DC power supply.
Model | BH-485-DO |
Parameter measurement | Dissolved oxygen,temperature |
Measure range | Dissolved oxygen:(0~20.0)mg/L |
Temperature:(0~50.0)℃ | |
Basic error | Dissolved oxygen:±0.30mg/L |
Temperature:±0.5℃ | |
Response time | Less than 60S |
Resolution | Dissolved oxygen:0.01ppm |
Temperature:0.1℃ | |
Power supply | 24VDC |
Power dissipation | 1W |
communication mode | RS485(Modbus RTU) |
Cable length | Can be ODM depend on user’s requirements |
Installation | Sinking type, pipeline, circulation type etc. |
Overall size | 230mm×30mm |
Housing material | ABS |
Product detail pictures:



Related Product Guide:
Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Wholesale China dissolved oxygen probe Manufacturers Pricelist - BH-485-DO Digital Dissolved Oxygen Sensor – BOQU , The product will supply to all over the world, such as: UK, Swaziland, Germany, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
