Wholesale China Chemical Oxygen Demand Analysis Suppliers Factories - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU

Short Description:

Product Detail

Feedback (2)

We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Conductivity Meter For Saltwater , Online Dissolved Oxygen Meter , Ph Glass Electrode , We sincerely welcome you appear to go to us. Hope now we have fantastic cooperation during the upcoming.

Wholesale China Chemical Oxygen Demand Analysis Suppliers Factories - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU Detail:

DOG-208F Dissolved Oxygen Electrode applicable for Polarography Principle

With platinum (Pt) as cathode and Ag / AgCl as anode

The electrolyte is 0.1 M potassium chloride (KCI).

The silicone rubber permeable membrane imported from U.S. serves as the permeable

membrane.

It has silicone rubber and steel gauze.

It is featured by collision resistance, corrosion resistance, high.temperature resistance, shape

retention and other performances

Measuring range: 0-100ug/L 0-20mg/L

Electrode material: 316L stainless steel

Temperature compensation resistor: 2.252K 22K Ptl00 Ptl000 etc

Sensor life: >3 years

Cable length: 5m (double shielded)

Detection lower Limit: 0.1ug/L(ppb)(20℃)

Measurement upper limit: 20mg/l(ppm)

Response time: ≤3min(90％, 20℃)

Polarization time: >8h

Minimum flow rate: 5cm/s; 515 L/h

Drift: <3%/month

Measurement error: <±1 ppb

Air current: 50-80nA Note: Maximum current 20-25 uA

Polarization voltage: 0.7V

Zero Oxygen: <5ppb(60min)

Calibration intervals: >60 days

Measured water temperature:0~60℃

Measuring range: 0-100ug/L 0-20mg/L

Electrode material: 316L stainless steel

Temperature compensation resistor: 2.252K 22K Ptl00 Ptl000 etc

Sensor life: >3 years

Cable length: 5m (double shielded)

Detection lower Limit: 0.1ug/L(ppb)(20℃)

Measurement upper limit: 20mg/l(ppm)

Response time: ≤3min(90％, 20℃)

Polarization time: >8h

Minimum flow rate: 5cm/s; 515 L/h

Drift: <3%/month

Measurement error: <±1 ppb

Air current: 50-80nA Note: Maximum current 20-25 uA

Polarization voltage: 0.7V

Zero Oxygen: <5ppb(60min)

Calibration intervals: >60 days

Measured water temperature:0~60℃

Applied to thermal power plants, power plant desalted water,.

boiler feed water etc places of trace oxygen content.

Product detail pictures:

Related Product Guide:

We retain improving upon and perfecting our items and repair. At the same time, we perform actively to do research and progress for Wholesale China Chemical Oxygen Demand Analysis Suppliers Factories - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU , The product will supply to all over the world, such as: Doha, India, Johannesburg, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.

Dissolved Oxygen Controller