Online Inductive Acid Alkaline Concentration Sensor

Short Description:

★ Model: DDG-GY

★ Measure range:  

HNO3: 0~25.00%; H2SO4: 0~25.00% 

HCL: 0~20.00% ; NaOH: 0~15.00% ; 

★ Protocol: 4-20mA or RS485 signal output

★ Power Supply: DC12V-24V

★ Features: Strong anti-interference, High accuracy

★ Application: Chemical, Waste water, River water, Power plant


  • facebook
  • linkedin
  • sns02
  • sns04

Product Detail

User Manual

Introduction

Digital conductivity sensor has all the functions of measuring and digitizing conductivity and various salinity, acid and alkali concentrations. It overcomes many

difficulties of the previous sensors and integrates the signal processing circuit into an embedded MCU ASIC, which enables the sensor to be calibrated before

leaving the factory, and the calibration value is permanently stored in the probe. With temperature compensation function,the temperature is also directly digital output.

 

Features

1. Performance in harsh chemical environments is excellent, chemical resistant material manufactured by the electrode is not polarized interference, to avoid dirt,

grime and even affect fouling layer covering phenomena such as very poor, simple and easy to install so it's a very wide range of applications. Design electrodes

applied to a high concentration of acids (such as fuming sulfuric acid) environment.

2. English acid concentration meter use, high accuracy, and high stability.

3. Conductivity sensor technology eliminates clogging and polarization errors. Used in all areas of contact electrodes may cause blockage which has a high

performance.

4. Large aperture sensor, long-term stability.

5. Accommodate a wide range of brackets and use common bulkhead mounting structure, flexible installation.

 

Technical Indexes

1.Measurement range HNO3: 0~25.00%;

H2SO4: 0~25.00%

HCL: 0~20.00% 

NaOH: 0~15.00%

2. Electrode body materials PP
3.Temperature compensation range 0~60℃
4.Accuracy (cell constant) ± (+25 us to measure the value of 0.5%)
5.Maximum pressure (bar) 1.6MP
6.Output 4-20mA or RS485
7.Installation flow-through, pipeline, immersion
8.Pipe installations pipe threads 1 ½ or ¾ NPT
9.Power Supply DC12V-24V
10.Cable 5 meters

  • Previous:
  • Next:

  • Inductive Conductivity Sensor 4-20mA User Manual

    Inductive Conductivity Sensor RS485 User Manual

    Write your message here and send it to us