Brief Introduction
New Industrial PH&ORP Meter Built-in A/D conversion module, compatible with a variety of analog signal electrodes. Complete functions, stable performance, easy operation, low power consumption, safety and reliability are the outstanding advantages of this instrument. This instrument is equipped with RS485 transmission interface, which can be connected to the host computer through ModbusRTU protocol to realize monitoring and recording. It can be widely used in industrial occasions such as thermal power generation, chemical industry, metallurgy, environmental protection, pharmaceutical, biochemical, food and tap water.
Technical Indexes
Functions | pH | ORP |
Measuring range | -2.00pH to +16.00 pH | -2000mV to +2000mV |
Resolution | 0.01pH | 1mV |
Accuracy | ±0.01pH | ±1mV |
Temp. compensation | Pt 1000/NTC10K | |
Temp. range | -10.0 to +130.0℃ | |
Temp. compensation range | -10.0 to +130.0℃ | |
Temp. accuracy | ±0.5℃ | |
Display | Back light, dot matrix | |
pH/ORP current output1 | Isolated, 4 to 20mA output , max. load 500Ω | |
Temp. current output 2 | Isolated, 4 to 20mA output , max. load 500Ω | |
Current output accuracy | ±0.05 mA | |
RS485 | Mod bus RTU protocol | |
Baud rate | 9600/19200/38400 | |
Maximum relay contacts capacity | 5A/250VAC,5A/30VDC | |
Language selection | English/ Chinese | |
Waterproof grade | IP65 | |
Power supply | From 90 to 260 VAC, power consumption < 4 watts, 50/60Hz | |
Material | ABS | |
Installation | panel/wall/pipe installation | |
Size/Weight | 144mm×144mm×104mm, 0.9Kg |
Write your message here and send it to us