IoT Digital Total suspended solids (TSS) Sensor

Short Description:

★ Model No: ZDYG-2087-01QX

★ Protocol: Modbus RTU RS485

★ Power Supply: DC12V

★ Features: Scattered light principle, automatic cleaning system

★ Application: Sewage water, ground water, river water, water station

Send email to us

Product Detail

Manual

Brief Introduction

The ZDYG-2087-01QX digital suspended solid sensor is based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of suspended solids and sludge concentration. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of suspended solids and sludge concentration value. According to the usage environment, self-cleaning function can be equipped with. It assures the stability of data and reliability of performance; with the built-in self-diagnosis function.The digital suspended solid sensor measure the water quality and delivery the data in high precision,the sensor installation and calibration is quite simple too.

Application

Widely using in sewage plant, water plant, water station, surface water, farming, industry and other fields.

Technical Parameters

Measurement Range	0.01-20000 mg/L,0.01-45000 mg/L ,0.01-120000 mg/L
Communication	RS485 Modbus
Main Materials	Main Body:SUS316L (Ordinary Version),Titanium Alloy (Seawater Version) Upper and Lower Cover:PVC Cable: PVC
Waterproof Rate	IP68/NEMA6P
Indication Resolution	Less than ± 5% of the measured value (depending on sludge homogeneity)
Pressure Range	≤0.4Mpa
Flow velocity	≤2.5m/s,8.2ft/s
Temperature	Storage Temperature:-15~65℃;Environment Temperature:0~45℃
Calibration	Sample Calibration, Slope Calibration
Cable Length	Standard 10-Meter Cable, Max Length: 100 Meters
Power Supply	12 VDC
Size	Diameter 60mm* Length 256mm