Introduction
This sensor is a thin-film current principle chlorine sensor, which adopts a three-electrode measurement system.
The PT1000 sensor automatically compensates for temperature, and is not affected by changes in flow rate and pressure during measurement. The maximum pressure resistance is 10 kg.
This product is reagent-free and can be used continuously for at least 9 months without maintenance. It has the characteristics of high measurement accuracy, fast response time and low maintenance cost.
Application: This product is widely used in city pipe water, drinking water, hydroponic water and other industries.
Technical Parameters
Measuring parameters | HOCL; CLO2 |
Measuring range | 0-2mg/L |
Resolution | 0.01mg/L |
Response time | <30s after polarized |
Accuracy | measure range ≤0.1mg/L, error is ±0.01mg/L; measure range ≥0.1mg/L, error is ±0.02mg/L or ±5%. |
pH range | 5-9pH, no less than 5pH to avoid break for membrane |
Conductivity | ≥ 100us/cm, cannot use in ultra pure water |
Water flow rate | ≥0.03m/s in flow cell |
Temp compensation | PT1000 integrated in sensor |
Storage temp | 0-40℃(No freezing) |
Output | Modbus RTU RS485 |
Power supply | 12V DC ±2V |
Power Consumption | around 1.56W |
Dimension | Dia 32mm * Length 171mm |
Weight | 210g |
Material | PVC and Viton O sealed ring |
Connection | Five-core waterproof aviation plug |
Max pressure | 10bar |
Thread size | NPT 3/4’’ or BSPT 3/4’’ |
Cable length | 3 meters |
Write your message here and send it to us