Featured
-
Wholesale China Multiparameter Ph Meter Manufacturers Pricelist - PH5806-K8S High-temperature PH Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0.4MPa. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts K8S and PGl3.5 thread socket, which can be replaced by any overseas electrode. 4. For the electrode length, there are 120, 15... -
China Wholesale Residual Chlorine Electrode Suppliers Factories - CLG-6059T Online Residual Chlorine Analyzer – BOQU
Monitoring of chlorine disinfection treatment water such as swimming pool water, drinking water, pipe network and secondary water supply etc. Measurement configuration PH/Temp/residual chlorine Measuring range Temperature 0-60℃ pH 0-14pH Residual chlorine analyzer 0-20mg/L（pH：5.5-10.5） Resolution and accuracy Temperature Resolution：0.1℃ Accuracy：±0.5℃ pH Resolution：0.01pH Accuracy：±0.1 pH Residual chlorine analyzer Resolution：0.01mg/L Accuracy：±2% FS... -
Wholesale China Online Turbidity Meter Suppliers Factories - MPG-6099 Multi-parameter Analyzer – BOQU
Dimensions The wall-mounted multi-parameter meter is made of plastic and has a transparent cover. Appearance dimensions are: 320mm x 270mm x 121 mm, waterproof rating IP65. Display: 7 inch touch screen. -
Wholesale China Online Turbidimeter Quotes Manufacturer - MPG-6099 Multi-parameter Analyzer – BOQU
Dimensions The wall-mounted multi-parameter meter is made of plastic and has a transparent cover. Appearance dimensions are: 320mm x 270mm x 121 mm, waterproof rating IP65. Display: 7 inch touch screen. -
Wholesale China Conductivity Analyzer Factory Suppliers - DDG-GY Industrial Inductive Conductivity/TDS Sensor – BOQU
Features 1. Performance in harsh chemical environments is excellent, chemical resistant material manufactured by the electrode is not polarized interference, to avoid dirt, grime and even affect fouling layer covering phenomena such as very poor, simple and easy to install so it’s a very wide range of applications. Design electrodes applied to a high concentration of acids (such as fuming sulfuric acid) environment. 2. English acid concentration meter use, high accuracy, and high stabil... -
Wholesale China Conductivity Monitor Quotes Manufacturer - BH-485-DD-0.1 Digital Conductivity Sensor – BOQU
Features · Can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
China Wholesale Conductivity Sensor Suppliers Factories - BH-485-DD-0.1 Digital Conductivity Sensor – BOQU
Features · Can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
Wholesale China Handheld Water Conductivity Meter Factory Suppliers - BH-485-DD-0.1 Digital Conductivity Sensor – BOQU
Features · Can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
Wholesale China Ammonia Analyzer Quotes Manufacturer - TPG-3030 Industrial Total Phosphorus Analyzer – BOQU
The sample to be tested does not require any pretreatment. The water sample riser is directly inserted into the system water sample, and the total phosphorus concentration can be measured. The maximum measurement range of this equipment is 0.1~500mg/L TP. This method is mainly used for on-line automatic monitoring of total phosphorus concentration of waste (sewage) water discharge point source, surface water, etc. -
China Wholesale Inductive Conductivity Probe Manufacturers Pricelist - BH-485-DD-0.1 Digital Conductivity Sensor – BOQU
Features · Can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
Wholesale China Waste water Ph Sensor Suppliers Factories - PHG-3081 Industrial PH Meter – BOQU
Features Intelligent: This industrial PH meter adopts high-precision AD conversion and single chip microcomputer processing technologies and can be used for the measurement of the PH values and temperature, automatic temperature compensation and self-checking. Reliability: All the components are arranged on one circuit board. No complicated functional switch, adjusting knob or potentiometer arranged on this instrument. Double high impedance input: The latest components are adopted; The impeda... -
China Wholesale ION (F-,CL-,Ca2+,NO3-,NH4+ etc) Suppliers Factories - PF-2085 Online Ion Sensor – BOQU
Features Online ion electrode is measured in aqueous solution chlorine ion concentration or boundary determination and indicator electrode fluorine/chlorine ions to form stable complexes of ion concentration.
