DDG-GY Industrial Inductive Conductivity/TDS Sensor

Short Description:

★ Measure range: 0-2000ms/cm

★ Protocol: 4-20mA or RS485 signal output

★ Features: Strong anti-interference, High accuracy

★ Application: Chemical, Waste water, River water, Power plant

Send email to us

Product Detail

Technical Indexes

What is Conductivity?

Manual

Features

1. Performance in harsh chemical environments is excellent, chemical resistant material manufactured by the electrode is not polarized interference, to avoid dirt, grime and even affect fouling layer covering phenomena such as very poor, simple and easy to install so it's a very wide range of applications. Design electrodes applied to a high concentration of acids (such as fuming sulfuric acid) environment.

2. English acid concentration meter use, high accuracy, and high stability.

3. Conductivity sensor technology eliminates clogging and polarization errors. Used in all areas of contact electrodes may cause blockage which has a high performance.

4. Large aperture sensor, long-term stability.

5. Accommodate a wide range of brackets and use common bulkhead mounting structure, flexible installation.

Previous: DDG-GY Industrial Inductive Conductivity/TDS Sensor

Next: DDG-10.0 Industrial Conductivity Sensor

1. Maximum pressure (bar): 1.6MP
2. Electrode body materials: PP, ABS, PTFE optional
3. Measuring range: 0 ~ 20ms/cm，0-200ms/cm，0-2000ms/cm
4. Accuracy (cell constant):. ± (+25 us to measure the value of 0.5%)
5. Installation: flow-through, pipeline, immersion
6. Pipe installations: pipe threads 1 ½ or ¾ NPT
7. Output signal: 4-20mA or RS485

Conductivity is a measure of water’s capability to pass electrical flow. This ability is directly related to the concentration of ions in the water
1. These conductive ions come from dissolved salts and inorganic materials such as alkalis, chlorides, sulfides and carbonate compounds
2. Compounds that dissolve into ions are also known as electrolytes 40. The more ions that are present, the higher the conductivity of water. Likewise, the fewer ions that are in the water, the less conductive it is. Distilled or deionized water can act as an insulator due to its very low (if not negligible) conductivity value. Sea water, on the other hand, has a very high conductivity.

DDG-GY Inductive Conductivity Sensor User Manual

Conductivity Analyzer