China Wholesale Residual Chlorine Meter Factory Suppliers - IoT digital residual chlorine sensor pipeline installation – BOQU

Short Description:

Product Detail

Feedback (2)

Dependable good quality and very good credit score standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of "quality initial, shopper supreme" for Ammonia Nitrogen Analyzer , Dissolved Oxygen And Ph Meter , Sensors Ph , We've been confident that there'll become a promising future and we hope we can have long lasting cooperation with consumers from all over the world.

China Wholesale Residual Chlorine Meter Factory Suppliers - IoT digital residual chlorine sensor pipeline installation – BOQU Detail:

Introduction

This sensor is a thin-film current principle chlorine sensor, which adopts a three-electrode measurement system.

The PT1000 sensor automatically compensates for temperature, and is not affected by changes in flow rate and pressure during measurement. The maximum pressure resistance is 10 kg.

This product is reagent-free and can be used continuously for at least 9 months without maintenance. It has the characteristics of high measurement accuracy, fast response time and low maintenance cost.

Application: This product is widely used in city pipe water, drinking water, hydroponic water and other industries.

Technical Parameters

Measuring parameters	HOCL; CLO2
Measuring range	0-2mg/L
Resolution	0.01mg/L
Response time	＜30s after polarized
Accuracy	measure range ≤0.1mg/L, error is ±0.01mg/L; measure range ≥0.1mg/L, error is ±0.02mg/L or ±5%.
pH range	5-9pH, no less than 5pH to avoid break for membrane
Conductivity	≥ 100us/cm, cannot use in ultra pure water
Water flow rate	≥0.03m/s in flow cell
Temp compensation	PT1000 integrated in sensor
Storage temp	0-40℃（No freezing）
Output	Modbus RTU RS485
Power supply	12V DC ±2V
Power Consumption	around 1.56W
Dimension	Dia 32mm * Length 171mm
Weight	210g
Material	PVC and Viton O sealed ring
Connection	Five-core waterproof aviation plug
Max pressure	10bar
Thread size	NPT 3/4’’ or BSPT 3/4’’
Cable length	3 meters

Product detail pictures:

Related Product Guide:

We thinks what prospects think, the urgency of urgency to act from the interests of a client position of theory, allowing for greater high-quality, reduced processing costs, rates are much more reasonable, won the new and previous consumers the support and affirmation for China Wholesale Residual Chlorine Meter Factory Suppliers - IoT digital residual chlorine sensor pipeline installation – BOQU , The product will supply to all over the world, such as: The Swiss, Peru, Mauritania, To let customers be more confident in us and get the most comfortable service, we run our company with honesty, sincerity and best quality . We firmly believe that it is our pleasure to help customers to run their business more successfully, and that our experienced advice and service can lead to more suitable choice for the customers.

Residual Chlorine Analyzer

Residual Chlorine Controller

Residual Chlorine Electrode

Residual Chlorine Meter

Residual Chlorine Probe

Residual Chlorine Sensor

Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!

By Dorothy from Surabaya - 2018.09.23 17:37

The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.

By Gloria from Costa rica - 2018.10.01 14:14

Write your message here and send it to us